Tel : +86 15814022871
Email : sales@daftag.com
3 x 13 mm 134.2 kHz EM4305 Glass RFID Animal Tag for Pets
DAFTags 3 x 13 mm EM4305 glass RFID animal tag is a compact 134.2 kHz injectable glass tag for pet identification programs and OEM animal ID projects. The glass housing is designed for small animals such as dogs, cats, and other pets that need a readable electronic ID in an animal management system.
Each tag carries an EM4305 read/write chip for use with compatible 134.2 kHz animal ID readers. Tags can be supplied blank or encoded before shipment, and reader compatibility should be confirmed before production.
What Is an EM4305 Glass RFID Pet Microchip?
An EM4305 glass RFID pet microchip is a small low-frequency identification tag used in pet registration and animal management systems. This version uses a 3 x 13 mm glass body with an external biological coating, making it suitable for applications where a compact injectable glass tag is required.
The chip is designed for 134.2 kHz animal ID systems and supports read/write operation when used with compatible equipment. It is not a tracking device and does not replace veterinary judgment on where or whether a tag should be implanted.
Key Features
- Compact 3 x 13 mm Format: Small glass profile for pet identification programs and applications where tag size matters.
- 134.2 kHz EM4305 Chip: Low-frequency chip intended for use with compatible animal ID readers and antennas.
- Read/Write Memory: Supports encoding when used with compatible read/write equipment and the correct configuration.
- Biocompatible Glass Housing: Constructed with biocompatible glass and an external biological coating for animal ID applications.
- Sealed Glass Body: Designed for environments where the tag may be exposed to moisture; final IP rating should be confirmed for the production version.
- OEM Encoding and Project Supply: Encoding, packaging, numbering, and project requirements can be reviewed before shipment.
Technical Specifications
| Product Model | DFTZS008 |
| Product Type | Injectable Glass RFID Animal Tag |
| Size | 3 x 13 mm |
| Chip | EM4305 |
| Frequency | 134.2 kHz |
| Material | Biocompatible glass with external biological coating |
| Color | Transparent glass |
| Protocol | Animal ID ISO 11784/11785 reference; confirm exact chip version and reader compatibility |
| Memory Operation | Read/write, subject to compatible equipment |
| Reading Distance | Approximately 1-28 cm, depending on reader and antenna configuration |
| Minimum Working Distance | No less than 2 cm, depending on read/write equipment |
| Working Temperature | -20°C to +80°C |
| Read/Write Cycles | Up to 100,000 times per supplier data; confirm for the final chip configuration |
| Water and Dust Protection | Sealed glass housing; final IP rating to be confirmed for the production batch |
| Encoding | Available on request |
| Packing | Anti-static PE zip-lock bag |
- About DAFTags high quality microchip
2.Material:Bio-glass not acrylic--harmless to animal
3.PARYLENE Capsule outside the microchips--Prevent Migration
4.FDX-B ISO 11784/11785
Our microchip totally meet those standards,please don't worry.
Applications
- Pet identification programs for dogs and cats
- Veterinary clinics and animal hospitals
- Animal shelters and rescue organizations
- Small-animal registration and management
- Laboratory and research animal identification
- OEM pet microchip and animal ID projects
OEM Encoding and Customization
For project orders, DAFTags can discuss the following before production:
- Encoding format, data structure, and numbering range
- Reader model or animal ID system compatibility
- Required protocol and chip configuration
- Other glass sizes, such as 2 x 12 mm, 3 x 15 mm, 1.4 x 8 mm, or 4 x 32 mm
- Packaging and labeling requirements
- Destination country and applicable registration requirements
Reader Compatibility and Reading Distance
The tag is intended for compatible 134.2 kHz animal ID readers. Actual reading distance depends on the reader, antenna, tag orientation, implantation or mounting conditions, and surrounding environment. The 1-28 cm range shown in the specification is not a guaranteed distance in every setup.
If you already operate an animal ID system, send the reader model and protocol requirements so compatibility can be confirmed before ordering.
Before You Place an Order
Pet microchip projects often depend on local registration, reader compatibility, and certification requirements. Please confirm the following with your technical team before production:
- ICAR certificate or product-level qualification, if required for your market
- Exact protocol and reader compatibility for this EM4305 version
- Production IP rating, if your market or tender requires one
- Read/write cycle requirement for your intended use
- Encoding format and numbering range
- Local rules for pet microchip implantation and registration
FAQ
Will this 3 x 13 mm pet microchip work with my existing reader?
Compatibility depends on the reader model, frequency, chip protocol, and encoding format. Send your reader details so we can confirm the tag configuration before shipment.
Can you encode the glass RFID tags before delivery?
Yes. Encoding is available for project orders. Provide the required data format, numbering range, and any other encoding instructions.
Is this tag for dogs and cats?
The 3 x 13 mm format is intended for pet and small-animal identification. Final use and implantation must follow veterinary guidance and local regulations.
What is the actual reading distance?
The source specification shows approximately 1-28 cm depending on the reader and antenna. Actual distance varies with the equipment, tag position, and environment.
Can I order other glass RFID tag sizes?
Other sizes and configurations may be available. Share the target animal, reader system, and required dimensions for confirmation.
Do you have ICAR certification?
ICAR-related claims should be verified for the exact model and current production version. Request the certificate or qualification document before publishing any ICAR statement.
Contact DAFTags with your reader model and quantity for an OEM quotation.
